Laptop & Tablet Mounts

Compatible with the Panasonic FZ-F1/N1 Rugged handheld Compatible with FZ-N1 extended battery pack Amps mounting hole pattern Alignment tabs prevent damage to docking connector when cradling the FZ-N1 Composite design for reduced weight and long-term durability

This cradle is designed to accommodate the T1 handheld's stylus tether and large battery (sold separately) Easy to use one-handed operation: Insert bottom of the handheld into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Spring-loaded POGO style connector for charging; cable restraint system Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence AMPS mounting pattern Rounded edges to enhance personal safety

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.

Simple design sits on top of mounting legs of center seat using the OEM hardware Spacers to go in-between the Transmission Hump base and OEM legs are included with the base A metal covering mounts underneath the base providing coverage of exposed vehicle metal and helps keeps small items from falling under OEM carpet An offset riser is included to help with positioning your mount to the desired location Three (3) sets of mounting holes to place the lower pole

Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Quickly install this base utilizing the front passenger seat bolts Vehicle base positions the lower pole of the computer mount closer to the transmission hump to provide more room by the passenger Includes an offset riser is included with the base to position the computer mount closer to the center Works around the HVAC duct that runs under the passenger seat Designed to not interfere with factory OEM console or seat levers

Base attaches to inboard and outboard passenger side seat rails and does not require drilling Riser (included) bolts on to base for added height and moves pole closer to the center of the vehicle Forward seat movement is affected slightly Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Support Brace (item no. 7160-0230) recommended

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory-installed consoles Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. PEMs for adjustability to accommodate OEMs in the civilian models Support Brace ( 7160-0230 ) is highly recommended

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Multiple mounting slots allow for flexible positioning of the Offset Universal Mounting Step.

Installs onto the inboard and outboard passenger seat hooks in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Included is one (1) Offset Universal Mounting Step (item no. DS-STEP). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Simple, one-handed cradle operation: Insert bottom of tablet into the cradle and push top of the tablet in until the lock engages Push latch button up with your thumb, then remove the tablet from the cradle Cradle accommodates the card reader/scanner and tablet stylus - there is even room for the stylus lanyard Guide walls and alignment tabs ensure proper positioning when inserting the tablet VESA 75mm mounting pattern Optional keyed lock for theft deterrence Steel and composite design for reduced weight Rugged construction for long-term durability

Compatible with the Panasonic Toughbook A3 tablet computer Cradle design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with DUAL RF ( Item No. 7160-1417-02 )

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Kit includes Getac ZX70 charging cradle (item no. 7160-1135-01) and Getac auto power adapter (item no. 18223) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern

Compatible with the Getac ZX10 tablet Cradle accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is cradled One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Composite/aluminum design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 and Toughbook G2 tablet computers with small or large bumper guards Cradle accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the cradle, push top of cradle down and engage lock to dock computer Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability