Firefighters

Compatible with the Panasonic Toughbook G2 and Toughpad FZ-G1 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughbook G2 and Toughpad FZ-G1 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Adds an additional storage place for stowing binders and files Attaches to the horizontal section of any Chevrolet Tahoe Vehicle Specific Console Box Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Won't interfere with passenger leg space Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Note: Base will not work with the Offset Universal Mounting Step ( DS-STEP )

Armrest flips up when not is use, saving space in the mobile workstation Mounts directly to the back of the console box The printer mount lid latches shut and can be used with a paddle lock for added security Paper deflector prevents paper from curling up and jamming Cable strain relief protects connector interface on the printer engine from damage Indicator lights and on/off button are easy to see and accessible when the cover is closed

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 ). Legs are compatible with both the Retail and the Special Service (SSV) Models.

No-drill, easy to install solution Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 ) Can be used with any Gamber-Johnson Console Box (except the Ford Sedan and Utility Vehicle Specific Consoles) Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Padded, height-adjustable faceplate armrest Perfect for vehicle-specific consoles or vehicles that have space constraints Will work in most Gamber-Johnson console boxes Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Low profile, no-drill vehicle-specific console box Shorter console box allows for more room when mounting weapons on the prisoner cage 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance One Off set Universal Mounting Step ( DS-STEP ) is already included with this vehicle base. However, additional Off set Universal Mounting Steps can be ordered to stack on top of each other if needed. A Support Brace ( 7160-0230 ) is highly recommended

Ideal for holding pens, keys and other miscellaneous items Drain holes located in the bottom of the pocket Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Base designed to work with both the police and street model Dodge Charger Attaches to the seat studs on passenger side floor, under the seat Can be used with factory installed console A Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Low profile, no-drill vehicle-specific console box 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate Vertical, angled section accommodates 7.5” of mounting space and is designed to house full-sized radios Horizontal, low profile section accommodates 13” of mounting space and is designed to house radio control heads and accessories A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver's side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers

Installs in minutes with no drilling required Attaches to the passenger side floor, under the seat Won’t interfere with levers or factory-installed consoles located on transmission hump Won’t interfere with passenger leg space Includes one (1) Offset Universal Mounting Step (Item No. DS-STEP). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. For extra stability a Support Brace ( 7160-0230 ) is recommended

MCS Vehicle Leg Kit is not compatible with legacy Ford F-250 trucks Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 ) Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Won't interfere with passenger leg space Can be used with factory installed console One Offset Universal Mounting Step ( DS-STEP ) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed For extra stability, a Support Brace ( 7160-0230 ) is recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Note: Forward seat travel is affected