Public Works

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.

Attaches to the sides of the transmission hump Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0509. Works with our 23" (58.42 cm) 7160-0086 and 29" (73.66 cm) 7160-0085 top plates only Does not work with trucks with OEM center console with shifter

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (included with base) can adjust to help position the pole system closer towards the console Support base is strongly recommended Minor limited motion of seat

Mounts to existing seat bolts Limited forward seat travel Can be used with factory (OEM) console Support brace is strongly recommended Tubes and motion attachments sold separately

Easy one-handed operation: Insert bottom of tablet into the cradle, push the top of the tablet against the latch button until latch engages To remove tablet, push up on latch button with thumb and pull tablet from the cradle Height, Width, and depth adjustable to accommodate almost any size tablet computer Optional keyed lock for theft deterrence Composite/aluminum design for reduced weight and extended durability VESA 75 and AMPS mounting patterns 30 mph crash tested per SAE J1455 standard NotePad™ Touch Universal Cradle ( Item No. 7160-1299-00 ) Fits Tablets with the Following Dimensions: Length: 7.8 - 10.9 in / 19.8 - 27.6 cm Height: 4.5 - 7.3 in / 11.4 - 18.5 cm Depth: 0.28 - 1.12 in / 0.71 - 2.8 cm NotePad™ Touch XL Universal Cradle (Item No. 7160-1299-10) Fits Tablets with the Following Dimensions: Length: 10.0 - 13.0 in / 25.4 - 33.0 cm Height: 7.0 - 9.7 in / 17.7 - 24.6 cm Depth: 0.28 - 1.12 in / 0.71 - 2.8 cm

This cradle is designed to accommodate the T1 handheld's stylus tether and large battery (sold separately) Easy to use one-handed operation: Insert bottom of the handheld into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Spring-loaded POGO style connector for charging; cable restraint system Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence AMPS mounting pattern Rounded edges to enhance personal safety

Compatible with the Panasonic Toughbook® FZ-T1 handheld computer This cradle is designed to accommodate the T1 handheld's stylus tether and large battery (sold separately) Easy to use one-handed operation: Insert bottom of the handheld into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence AMPS mounting pattern Rounded edges to enhance personal safety

Compatible with the Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Works with the 2018 Pursuit Rated Police Responder Ford F-150 Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money No leg kit needed for installation Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded PEMS for various items for quickly mounting various accessories (mic clips, rear arm rest, side arm rest Verify if vehicle is equipped with floor shifter. If so, please see part 7160-1326 Does NOT work with factory center shifter console option Does NOT work with floor 4X4 shifter option

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence Vesa 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Designed for the Getac A140 tablet computer Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability VESA 75mm mounting pattern

Designed for the Getac A140 tablet computer Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability Vesa 75mm mounting pattern

Compatible with the Getac K120 computer Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Docking station design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrance Upward-facing I/O ports; integrated cable strain relief and cable management system Vesa 75mm mounting pattern Rounded edges to enhance personal safety