Public Works

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Legs attach to both short and long MCS Top Plates (Item No. 7160-0085 or 7160-0086) Works with electric seat using full range of movement

The front plate of the console has placement for a power distribution block or LIND shut-down timer using pre-configured mounted holes Fully welded construction for long term product life span Wiring chase bolts onto the front of the console to conceal the wires for a finished look and is adjustable to fit both the Tahoe and Silverado. May NOT fit all vehicles Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on the passenger side using the provided knock-outs or by purchasing a separate relocation faceplate Computer can be mounted in 2 locations: Off-set towards the passenger on the "smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Ships fully assembled (except for accessories) with 3 faceplates and 3 filler panels Does not require a top plate

Secures a pedestal system onto the Ford Transit and Mercedes Benz Metris Van seat studs without drilling Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance A Suppport Brace ( 7160-0231 ) is highly recommended Limited Lifetime Warranty

Provides a secure base for a pedestal system Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance A Support Brace ( 7160-0230 ) is highly recommended

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Included is one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. A Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Base is designed to be secured between the passenger seat pedestal and the seat rails. Installs in minutes with no drilling required Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Support Brace ( 7160-0231 ) is highly recommended Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Will not interfere with levers or factory installed console Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Note: Rearward travel of the passenger seat is not affected, however, forward seat travel is slightly affected

Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75 mounting pattern Use External power supply: Lind Auto Adapter (Item No. 15110) Screen support is included with the dock

Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75 mounting pattern Use External power supply: Lind Auto Adapter ( 7300-0463 ) Screen support is included with the dock

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory-installed consoles Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. PEMs for adjustability to accommodate OEMs in the civilian models Support Brace ( 7160-0230 ) is highly recommended

Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 ) Comes with 2 leg brackets Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance

Compatible with the Panasonic Toughpad FZ-G1 and Toughbook G2 tablet computers with small or large bumper guards Cradle accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the cradle, push top of cradle down and engage lock to dock computer Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Accommodates extended battery, smart card reader, rear hand strap and bumper guards. Cradle can be mounted either vertically or horizontally. Alignment tabs prevent damage to the docking connector when docking the computer. Can be purchased with locks that are keyed differently for each docking station in your fleet. Steel and Composite design for reduced overall weight. Rugged construction for long-term durability. Note: Please contact Gamber-Johnson's Sales Department if you require a lock that is keyed differently per docking station for your fleet.

Compatible with the Panasonic Toughpad FZ-G1 and Toughbook G2 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 and Toughbook G2 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughbook G2 and Toughpad FZ-G1 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability