Medical
Kenwood 2-wire palm mic w/earphone, universal connector (Black)
KHS-11BL
KHS-10D-OH
Kenwood Hvy-duty noise reduction over-the-headset w/noise cancelling boom mic & in-line PTT
Kenwood Hvy-duty noise reduction over-the-headset w/noise cancelling boom mic & in-line PTT
KHS-10D-OH
KHS-10D-BH
Kenwood Hvy-duty noise reduction behind-the-headset w/noise cancelling boom mic & in-line PTT
Kenwood Hvy-duty noise reduction behind-the-headset w/noise cancelling boom mic & in-line PTT
KHS-10D-BH
Kenwood External speaker, 10W, 4-Ohm, 3.5mm phone plug
KES-8K
Kenwood External speaker, 40W max input
KES-5A
Kenwood 2.5mm earphone kit for Speaker Mic
KEP-2
Kenwood 3.5mm earphone kit for Speaker Mics
KEP-1
Kenwood Communications Kenwood Power Cable
Kenwood Power Cable
KCT-77M2
Kenwood Remote Control Cable for KCH-21RM (17 feet)
Remote Control Cable for Control Head and Mobile Radio NX-3000/5000 series
Kenwood Remote Control Cable for KCH-21RM (17 feet)
KCT-77M2
Kenwood External Accessory Connection Cable for KRK-18HM
KCT-72M
Kenwood KCT-71A Extended Control Head Cable (up to 50 ft. max.)
KCT-71A50
Kenwood KCT-71A Extended Control Head Cable (up to 100 ft. max.)
KCT-71A100
Handheld Control Head for Viking Series
KCH-21RVM
.png "KCH-21RM-S")
KCH-21RM-S
.png "KCH-21RM-S")
Handheld Control Head with Short Cable for NX-5000 Series
FEATURE HIGHLIGHTS
- Speaker microphone with full-featured control head
- Handheld design offers one-handed operation of PTT, volume and channel selection
- Designed to work with the NX-5000 Series mobile radios using Control Head Remote Kit
- Intuitive operation similar to that of the KCH-19 and KCH-20R control heads
- Built-in speaker with 1 W output
- Active noise reduction for a single microphone enabled by DSP on the radio
- 3.5mm-diameter earphone jack on the bottom
- Large 1.74-inch TFT/transflective LCD for at-a-glance operational status checking
- Intuitive GUI – 14-character full-color display with 5 lines for menus and icons
- 7-color programmable LED located at the top for easy recognition
- Multi-head/Multi-deck Configuration
- Built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles
- Data interface for radio programming, keyloading and data I/O
- Optional adapter for the RF Deck (KRK-15BM Control Head Remote Kit) is required
- for connection to the mobile radio
- Intuitive graphical UI is used even for the selection of multiple RF decks.
- Dual Remote Control Heads x Multi RF Decks
- Dual Remote Control Heads x Single RF Deck
Handheld Control Head with Short Cable for NX-5000 Series
KCH-21RM-S
Handheld Control Head for NX-5000 Series
KCH-21RM
Kenwood KCH-20 Enhanced Head Unit for Viking series
KCH-20RV
KCH-20RM
Kenwood KCH-20 Enhanced Head Unit for NX-5000 series
For KENWOOD NX-5600, NX-5700, NX-5800, NX-5900 remote mount radios
Kenwood KCH-20 Enhanced Head Unit for NX-5000 series
KCH-20RM
.png "KCH-19VM")
KCH-19VM
.png "KCH-19VM")
Kenwood Basic Control Panel Viking Series
KCH-19VM
Kenwood Basic Control Panel NX-5000 Series
KCH-19M
KBP-8M2
Kenwood AA Alkaline Refillable Battery Pack for NX-5000 Series
Alkaline Battery Case, 12 AA Cells, 9V for KENWOOD NX-5200, NX-5300, NX-5400 radios
Kenwood AA Alkaline Refillable Battery Pack for NX-5000 Series
KBP-8M2