Firefighters

Low profile vehicle specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels that will require assembly Must order as is. There are no substitutions for accessories. Accessories may need to be assembled. Horizontal, low profile section accommodates 10.0” (25.4 cm) of mounting space or 5.5” (14.0 cm) mounting space with cup holder and is designed to house radio control heads and accessories. Vertical, angled section accommodates 6” (15.24 cm) of mounting space and is designed to house full-sized radios.

Low profile vehicle-specific console box Console attaches to transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels

Access to all tablet control buttons and ports while the tablet is docked Adjustable front hooks can be set to accommodate the Dell Latitude 12 and 14 Rugged Extreme and 14 Rugged laptop computers Front-facing USB 2.0 and Mic/Aux ports Rear-facing I/O ports; integrated cable strain relief and cable management system Front-facing docking/release latch Keyed lock for theft deterrence Optional Tri RF (WWAN,WLAN, GPS) TNC Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Small footprint designed to maximize available space. Rear hooks and guide pins ensure proper alignment and docking connectivity. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durability. Screen support is included with the dock. Comes with a power supply bracket to attach the Getac power supply (item no. 17057) to the bottom of the dock.

Small footprint designed to maximize available space. Rear hooks and guide pins ensure proper alignment and docking connectivity. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durability. Screen support is included with the dock. Comes with a power supply bracket to attach the LIND power supply to the bottom of the dock.

Small footprint designed to maximize available space. Rear-facing I/O ports, integrated cable strain relief system, and convenient cable management system. Rear hooks and guide pins ensure proper alignment and docking connectivity. Spring-loaded docking connector to ensure connectivity in the roughest terrain. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durabililty. Screen support is included with the dock. Comes with a power supply bracket to attach the Getac power supply (Item No. 17057) to the bottom of the dock.

Small footprint designed to maximize available space. Rear-facing I/O ports, integrated cable strain relief system, and convenient cable management system. Rear hooks and guide pins ensure proper alignment and docking connectivity. Spring-loaded docking connector to ensure connectivity in the roughest terrain. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durabililty. Screen support is included with the dock. Comes with a power supply bracket to attach the Getac power supply (Item No. 17057) to the bottom of the dock.

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed for the Getac T800 8.1-inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting  patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability External power supply: 90W Lind Auto Adapter (Item No. 15110) is included

Designed for the Getac T800 8.1-inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting  patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability External power supply: 90W Lind Auto Adapter (Item No. 15110) is included

Compatible with Getac V110 convertible computer Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75mm mounting pattern External power supply: Lind Auto Adapter ( Item No. 7300-0463 ) is included Screen support is included with the dock

Compatible with Getac V110 convertible computer Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75 mounting pattern External power supply: Lind Auto Adapter ( Item No. 7300-0463 ) is included Screen support is included with the dock

The Ram ProMaster pedestal system kit is constructed of heavy-duty steel for long-lasting use. It attaches between the passenger seat pedestal and seat rails to secure your entire mounting system. Must order as is. There are no substitutions.