Firefighters

Kit includes: Vehicle Specific Console with Cup Holder, Armrest, USB AUX Input Faceplate, and Tahoe Wings Low profile, no-drill vehicle specific console for the Chevy Tahoe (2016), Chevy Silverado 1500 (2015-2016), and Chevy Silverado 2500/3500/HD (2016) Vehicle Specific Console with armrest and cup holder Attaches directly to the Chevy Tahoe and Silverado vehicles without the need to order a separate top plate, leg kit is provided with the 7170 - 0237 kit number Console box works with Manual 4x4 shift lever Horizontal, low profile section: Horizontal, low profile section accommodates  7" (17.78 cm) of mounting space including internal cup holder (or 11.5" without cupholder) Designed to house fill sized devices and accessories Vertical, angled sections: Accommodates 1 to 2 full sized devices (7.5” of mounting space) Two 12 volt plug inserts (located on passenger side) USB/MP3/SD card from factory console can be relocated on the passenger side using the provided knock-outs or by the relocation faceplate (Item No. 15250) Front plate of console (underneath dash) has placement for a power distribution block or Lind shut-down timer using pre-configured mounted holes Tahoe Wings bolt onto the front of the console to cover/hide the wires for a finished look and provides relocation of power outlets knockouts and aftermarket knockouts Box will ship fully assembled (except for accessories) Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern” On the 3-bolt pattern closer to the driver for easy articulation access Fully welded construction for long term product life span 3 faceplates and 3 filler panels are included

No-drill solution that attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item #15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 7” (17.78 cm) of mounting space and is designed to house radio control heads and accessories (included cup holder uses 4.5" (11.43 cm) of that space) 3 faceplates and 3 filler panels are included Box ships fully assembled (except for accessories) Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance

Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance

No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled

Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250. Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250 ) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box ships fully assembled 3 faceplates and 3 filler panels are included

No-drill solution that attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 7" (17.78 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included

Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250). Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 11.5" (29.2 cm) of mounting space and is designed to house radio control heads and accessories. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Must order as is. There are no substitutions.

Must order as is. There are no substitutions.

Must order as is. There are no substitutions.

Must order as is. There are no substitutions.

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Three (3) faceplates and 3 filler panels are included Console box ships fully assembled (except for accessories)

Low profile, no-drill vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Horizontal, low profile section accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios Heavy gauge steel, fully welded constructed for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplate and 3 filler panels are included Console box ships fully assembled (except for accessories) Must order as is. There are no substitutions for accessories. Accessories may need to be assembled

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to the transmission hump (does not require a Leg Kit or Top Plate) A removable top plate and center brace for easy radio installation and wire routing Four 12 Volt knock-outs (located on passenger side) USB and MP3 knock-outs for aftermarket module (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section : Section accommodates 11” of mounting space and is designed to house radio control heads and accessories Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Kit includes: Vehicle Specific Console, Cup Holder, Armrest and Filler Panel (Three Switch and Three Cigarette Jack Knockouts) Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four, 12 Volt knock-outs (Located on passenger side) USB and MP3 knock-outs for aftermarket module: (PN 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section: Section accommodates 11” of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices