Laptop & Printer Mounts

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Will not interfere with levers or factory installed console Support Brace ( 7160-0230 ) is highly recommended Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Note: Rearward travel of the passenger seat is not affected, however, forward seat travel is slightly affected

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (included with base) can adjust to help position the pole system closer towards the console Support base is strongly recommended Minor limited motion of seat

Easily attaches to the passenger side seat rails Angled step (included with base) conveniently positions the pole system closer towards the console for ease of use Will not interfere with factory OEM console or seat levers Black powder coat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability

Conveniently holds printer and paper in separate trays New wire draw latch provides a secure fit to reduce vibration noise Bolt-on cable restraint provided a cable management options if desired Paper roll cut-out allows for vertical orientation as well as standard horizontal orientation Printer can be easily removed from the mount for use outside of the vehicle Constructed of heavy gauge steel and powder coated for long term durability

Bracket mounted to pole gusset allows for additional attachment to seat frame Base works with most existing work boxes Attaches to the passenger side inner front and back seat studs Does not interfere with the passenger leg space Does not require drilling Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Attaches to the passenger side seat using the front seat bolts under the seat rails Angled step (inlcuded with base) can adjust to help position the pole system closer towards the console Support brace is strongly recommended Limited seat movement forward Will not fit in 2019 Chevrolet Silverado 1500 CLASSIC/GMC Sierra 1500 CLASSIC. See 7160-0510.

Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Simple design sits on top of mounting legs of center seat using the OEM hardware Spacers to go in-between the Transmission Hump base and OEM legs are included with the base A metal covering mounts underneath the base providing coverage of exposed vehicle metal and helps keeps small items from falling under OEM carpet An offset riser is included to help with positioning your mount to the desired location Three (3) sets of mounting holes to place the lower pole

Quickly install this base utilizing the front passenger seat bolts Vehicle base positions the lower pole of the computer mount closer to the transmission hump to provide more room by the passenger Includes an offset riser is included with the base to position the computer mount closer to the center Works around the HVAC duct that runs under the passenger seat Designed to not interfere with factory OEM console or seat levers

Base attaches to inboard and outboard passenger side seat rails and does not require drilling Riser (included) bolts on to base for added height and moves pole closer to the center of the vehicle Forward seat movement is affected slightly Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Support Brace (item no. 7160-0230) recommended

Rugged construction for long-term durability Flexible design On/off switch allows you two (2) different LED color combinations: Red White

Easy one-handed operation: Insert bottom of tablet into the cradle, push the top of the tablet against the latch button until latch engages To remove tablet, push up on latch button with thumb and pull tablet from the cradle Height, Width, and depth adjustable to accommodate almost any size tablet computer Optional keyed lock for theft deterrence Composite/aluminum design for reduced weight and extended durability VESA 75 and AMPS mounting patterns 30 mph crash tested per SAE J1455 standard NotePad™ Touch Universal Cradle ( Item No. 7160-1299-00 ) Fits Tablets with the Following Dimensions: Length: 7.8 - 10.9 in / 19.8 - 27.6 cm Height: 4.5 - 7.3 in / 11.4 - 18.5 cm Depth: 0.28 - 1.12 in / 0.71 - 2.8 cm NotePad™ Touch XL Universal Cradle (Item No. 7160-1299-10) Fits Tablets with the Following Dimensions: Length: 10.0 - 13.0 in / 25.4 - 33.0 cm Height: 7.0 - 9.7 in / 17.7 - 24.6 cm Depth: 0.28 - 1.12 in / 0.71 - 2.8 cm

Installs in minutes using the inboard and outboard passenger side seat studs with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory-installed consoles Includes one (1) Offset Universal Mounting Step ( DS-STEP ). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. PEMs for adjustability to accommodate OEMs in the civilian models Support Brace ( 7160-0230 ) is highly recommended

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Installs in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles One Offset Universal Mounting Step (Item No. DS-STEP) is already included with this vehicle base. However, additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed. Multiple mounting slots allow for flexible positioning of the Offset Universal Mounting Step.

Installs onto the inboard and outboard passenger seat hooks in minutes with no drilling required Angled step moves pole away from passenger leg space Will not interfere with levers or factory installed consoles Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Included is one (1) Offset Universal Mounting Step (item no. DS-STEP). Additional Offset Universal Mounting Steps can be ordered to stack on top of each other if needed.

Installs in the standard width console box quickly and easily Lockable lid safely secures the printer while out in the field Printer and paper can be easily accessed with the push of a button Cutouts provide optimal visibility and accessibility to the printer function lights and power controls USB extension wire with 90 degree plug is included

Simple, one-handed cradle operation: Insert bottom of tablet into the cradle and push top of the tablet in until the lock engages Push latch button up with your thumb, then remove the tablet from the cradle Cradle accommodates the card reader/scanner and tablet stylus - there is even room for the stylus lanyard Guide walls and alignment tabs ensure proper positioning when inserting the tablet VESA 75mm mounting pattern Optional keyed lock for theft deterrence Steel and composite design for reduced weight Rugged construction for long-term durability

Compatible with the Panasonic Toughbook A3 tablet computer Cradle design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with DUAL RF ( Item No. 7160-1417-02 )

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Kit includes Getac ZX70 charging cradle (item no. 7160-1135-01) and Getac auto power adapter (item no. 18223) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern