Consoles & Mounts

Low profile vehicle-specific console box Console attaches to transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (4) 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels Only the console box ships fully assembled (molded dash panels must be installed on-site) Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle specific console box Five fasteners for mounting right to the transmission hump, does not require a Leg Kit or MCS Top Plate. A removable top and center plate for easy radio installation and wire routing Five 12 Volt knock-outs located on the passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Rear armrest flips up when not in use to maximize workspace The Mongoose®-9" Locking Slide Arm with Short Clevis has 45 degree forward tilt capabilities and 360 degree swivel capabilities for easy viewing of laptops and devices Featuring a removable top plate for easy installation of radios and wire routing Includes knockouts for one 12V, one USB, and OEM relocations Dual cup/pen holder is removable for easy cleaning

Narrowed width creates extra clearance for seat belts and gun holsters Simple and fast no-drill installation Sloped front increases visibiltiy of radios and controls Knockouts for 12V outlets and accessories are included on the top, passenger side, and back side of the console 3-hole patterns on the top of the console allows for easy installation of motion attachments

Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests

Installs easily with no drilling required In-console printer mount with push button lock, safely stores the Brother PocketJet printer while still maintaining easy accessibility for paper replacements and maintenance Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort *No OEM relocation is required *Printer not included

Vehicle specific design for a custom fit Dual cup/pen holder is removable for easy cleaning Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing Rear armrest flips up when not in use to maximize workspace Includes knockouts for one 12V, one USB, and OEM relocations Includes the Mongoose®-9" Locking Slide Arm with Short Clevis has 45 degree forward tilt capabilities and 360 degree swivel capabilities for easy viewing of laptops and devices

Narrow design provides extra clearance between console box and seat for seat belts and gun holsters Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations Height adjustable side armrest provides optimal comfort and flips up when not in use *OEM relocation is located on the passenger side of the console box

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Convenient flip-up armrest and printer mount all in one Paper and printer not included Two separate pivot points on TS5 allow for swiveling, sliding, swiveling again and tilting computer to ideal location Included rear wire cover will meet up directly to Ford 85R if present

Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250. Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Installs easily with no drilling required Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility Printer armrest easily mounts to the back of the console box and keeps the Brother printer and paper secure with latching top 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments *No OEM relocation is required

Installs easily with no drilling required Push-button locking side pocket keeps valuables secure while out in the field Wide Body design maximizes mounting space between the front seats Magnetic phone holder positions phone wherever needed for easy accessibility Dual cup/pen holder is removable for easy cleaning Side Armrest is height adjustable (up to 3") for optimal comfort *OEM USB relocation knockout is located on the passenger side of the console box

Narrowed width creates extra clearance for seat belts and gun holsters Simple and fast no-drill installation Sloped front increases visibilty of radios and controls Knockouts for 12V outlets and accessories are included on the top, passenger side, and back side of the console 3-hole patterns on the top of the console allows for easy installation of motion attachments

Installation is fast and easy using existing OEM mounting points Knockouts are located on the front, side, and angled section of console for maximum flexibility and usability of 12V outlets and other accessories Push-button locking storage compartment secures valuables Threaded PEMS quickly mount various accessories (mic clips, rear arm rest, side arm rest) If vehicle is equipped with floor shifter, please see part 7160-1326 Does NOT work with factory center shifter console option Does NOT work with floor 4X4 shifter option

Works with Ford F-Series Trucks with the Floor 4X4 shifter Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded pems and studs for various items for quickly mounting various accessories (mic clips and arm rests)