Consoles & Mounts

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four 12-Volt knockouts (located on passenger side) USB and MP3 knockouts for aftermarket module: (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplates and 3 filler panels are included Console box ships fully assembled (except for accessories). Must order as it. There are no substitutions for accessories included with the kit. Accessories may need to be assembled Horizontal, low profile section: Accommodates 6.5" (15.2 cm) of mounting space with a cup holder, and 11" (27.9 cm) of mounting space without a cup holder installed Designed to house radios, control heads and accessories Vertical, angled section : Accommodates 7.5" (19.1 cm) of mounting space to house 1 to 2 full-sized radios or devices

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Padded armrest flips up for convenience Two separate pivot points on TS5 allow for swiveling, sliding, swiveling again and tilting computer to ideal location Included rear wire cover will meet up directly to Ford 85R if present

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console Dual cup/pen holder is removable for easy cleaning Break-Away Armrest slides forward 2" for optimal comfort and can be flipped up or swiveled to the side for convenience

Kit includes: Vehicle Specific Console with Cup Holder, Armrest, USB AUX Input Faceplate, and Tahoe Wings Low profile, no-drill vehicle specific console for the Chevy Tahoe (2016), Chevy Silverado 1500 (2015-2016), and Chevy Silverado 2500/3500/HD (2016) Vehicle Specific Console with armrest and cup holder Attaches directly to the Chevy Tahoe and Silverado vehicles without the need to order a separate top plate, leg kit is provided with the 7170 - 0237 kit number Console box works with Manual 4x4 shift lever Horizontal, low profile section: Horizontal, low profile section accommodates  7" (17.78 cm) of mounting space including internal cup holder (or 11.5" without cupholder) Designed to house fill sized devices and accessories Vertical, angled sections: Accommodates 1 to 2 full sized devices (7.5” of mounting space) Two 12 volt plug inserts (located on passenger side) USB/MP3/SD card from factory console can be relocated on the passenger side using the provided knock-outs or by the relocation faceplate (Item No. 15250) Front plate of console (underneath dash) has placement for a power distribution block or Lind shut-down timer using pre-configured mounted holes Tahoe Wings bolt onto the front of the console to cover/hide the wires for a finished look and provides relocation of power outlets knockouts and aftermarket knockouts Box will ship fully assembled (except for accessories) Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern” On the 3-bolt pattern closer to the driver for easy articulation access Fully welded construction for long term product life span 3 faceplates and 3 filler panels are included

Installs easily with no drilling required Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort *No OEM relocation is required

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Full depth accommodates one-piece radios and controls Easy installation, no OEM parts to be removed Center mount configuration maximizes passenger leg space OEM 12V/USB relocation, switch knockout, and 12V knockout included with no loss of mounting space Padded armrest flips up for convenience

Installs easily with no drilling required In-console printer mount with push button lock, safely stores the Brother PocketJet printer while still maintaining easy accessibility for paper replacements and maintenance Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility Vertical Mount provides flexibility to use the armrest of your preference for optimal comfort 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments *No OEM relocation is required *Printer not included

Wide body design maximizes mounting space Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations *Fit may vary if OEM console option is present *OEM relocation is located on the passenger side of the console box

Narrowed width creates extra clearance for seat belts and gun holsters Simple and fast no-drill installation Sloped front increases visibilty of radios and controls Knockouts for 12V outlets and accessories are included on the top, passenger side, and back side of the console 3-hole patterns on the top of the console allows for easy installation of motion attachments

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplate and 3 filler panels are included Console box ships fully assembled (except for accessories)

No-drill solution that attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item #15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 7” (17.78 cm) of mounting space and is designed to house radio control heads and accessories (included cup holder uses 4.5" (11.43 cm) of that space) 3 faceplates and 3 filler panels are included Box ships fully assembled (except for accessories) Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance

Works with the 2018 Pursuit Rated Police Responder Ford F-150 Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money No leg kit needed for installation Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded PEMS for various items for quickly mounting various accessories (mic clips, rear arm rest, side arm rest Verify if vehicle is equipped with floor shifter. If so, please see part 7160-1326 Does NOT work with factory center shifter console option Does NOT work with floor 4X4 shifter option

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Convenient flip-up armrest and printer mount all in one Paper and printer not included Included rear wire cover will meet up directly to Ford 85R if present

Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (5), 12 Volt knockouts (4 on the back and 1 on driver side) USB and MP3 knockouts from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels that will require assembly Must order as is. There are no substitutions for accessories. Accessories may need to be assembled. Horizontal, low profile section accommodates 10.0” (25.4 cm) of mounting space or 5.5” (14.0 cm) mounting space with cup holder and is designed to house radio control heads and accessories. Vertical, angled section accommodates 6” (15.24 cm) of mounting space and is designed to house full-sized radios.

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Printer armrest easily mounts to the back of the console box and keeps the Brother printer and paper secure with latching top Dual cup/pen holder is removable for easy cleaning Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments Includes knockouts for one 12V, one USB, and OEM relocations

Installs easily with no drilling required Push-button locking side pocket keeps valuables secure while out in the field Wide Body design maximizes mounting space between the front seats Magnetic phone holder positions phone wherever needed for easy accessibility Dual cup/pen holder is removable for easy cleaning *OEM USB relocation knockout is located on the passenger side of the console box