Mobiles & Accessories
KMB-34
Kenwood Mounting Case for KPS-15 Power Supply and NX-3000/ 5000 Series Mobile
KMB-34
Kenwood External speaker, 40W max input
KES-5A
KMC-66M
Kenwood MIL-SPEC Standard electret mobile microphone with 12 keypad (8-pin mod. plug)
KMC-66M
KRK-18HM
Kenwood Interface Kit for a Control Head
| Back Panel for the Control Head of NX-3720/3820 |
| Mounting Bracket included |
| IP54/55 Support with Head |
| AUX Port supported with KCT-72 |
Kenwood Interface Kit for a Control Head
KRK-18HM
.png "KCH-19VM")
KCH-19VM
.png "KCH-19VM")
Kenwood Basic Control Panel Viking Series
KCH-19VM
Kenwood Control Head Interface Kit for KCH-19M
KRK-14HM
KPS-15
Kenwood DC Switching Power Supply (117/230 VAC; 23A max. continuous, 25A peak)
KPS-15
Kenwood Basic Control Panel NX-5000 Series
KCH-19M
KCT-77M2
Kenwood Remote Control Cable for KCH-21RM (17 feet)
Remote Control Cable for Control Head and Mobile Radio NX-3000/5000 series
Kenwood Remote Control Cable for KCH-21RM (17 feet)
KCT-77M2
Kenwood KCT-71A Extended Control Head Cable (up to 50 ft. max.)
KCT-71A50
Kenwood Control Station Desktop Microphone (8-pin mod. plug)
KMC-59C
Kenwood KCT-71A Extended Control Head Cable (up to 100 ft. max.)
KCT-71A100
Kenwood KCH-20 Enhanced Head Unit for Viking series
KCH-20RV
KCH-20RM
Kenwood KCH-20 Enhanced Head Unit for NX-5000 series
For KENWOOD NX-5600, NX-5700, NX-5800, NX-5900 remote mount radios
Kenwood KCH-20 Enhanced Head Unit for NX-5000 series
KCH-20RM
Handheld Control Head for NX-5000 Series
KCH-21RM
.png "KCH-21RM-S")
KCH-21RM-S
.png "KCH-21RM-S")
Handheld Control Head with Short Cable for NX-5000 Series
FEATURE HIGHLIGHTS
- Speaker microphone with full-featured control head
- Handheld design offers one-handed operation of PTT, volume and channel selection
- Designed to work with the NX-5000 Series mobile radios using Control Head Remote Kit
- Intuitive operation similar to that of the KCH-19 and KCH-20R control heads
- Built-in speaker with 1 W output
- Active noise reduction for a single microphone enabled by DSP on the radio
- 3.5mm-diameter earphone jack on the bottom
- Large 1.74-inch TFT/transflective LCD for at-a-glance operational status checking
- Intuitive GUI – 14-character full-color display with 5 lines for menus and icons
- 7-color programmable LED located at the top for easy recognition
- Multi-head/Multi-deck Configuration
- Built-in Bluetooth® with HSP (headset) and SPP (serial port) profiles
- Data interface for radio programming, keyloading and data I/O
- Optional adapter for the RF Deck (KRK-15BM Control Head Remote Kit) is required
- for connection to the mobile radio
- Intuitive graphical UI is used even for the selection of multiple RF decks.
- Dual Remote Control Heads x Multi RF Decks
- Dual Remote Control Heads x Single RF Deck
Handheld Control Head with Short Cable for NX-5000 Series
KCH-21RM-S
Kenwood Viking VM5000
VM5000Mobile
VM6000Mobile
Kenwood Viking VM6000
-
Product Info
- Mixed protocol operation (P25 Phase 1 & 2, Viking16, FM Analog)
- 1024 channels (2048 option)
- Mixed protocol zones
- P25 Authentication (Link Layer Authentication)
- P25 IP packet data
- P25 GPS data (built in GPS)
- MDC-1200 & GE-Star signaling
- P25 Conventional vote scan
- Remote mount only (Viking Control Head)
- Dual Viking Control Heads (option)
- Viking HHCH (option)
- External speaker
- Fixed control station
- Encryption
- ARC4™ software encryption; compatible with Motorola ADP™
- P25/TIA defined: AES-256
- DES-OFB
- Over-the-Air-Rekeying (OTAR)
- VK5000 or Motorola KVL3000/KVL4000 Keyloaders
Kenwood Viking VM6000
VM6000Mobile
VM7000Mobile
Kenwood Viking VM7000
Simultaneously receive and display up to four bands with the Viking VM7000 all-band mobile so you never miss a call. The “select” and “unselect” speakers give you the option for audio control similar to a dispatch console. KENWOOD Viking is the industry’s only mobile platform providing TrueVoice™ noise cancellation.
Kenwood Viking VM7000
VM7000Mobile