Lights & Sirens

FEATURES Approvals Single-color Models • SAE J845 Class 2 (Amber, Blue, Red, White) • SAE J595 Class 1 (Amber, Blue, Red, White) • CCR Title 13 Class B (Amber, Blue, Red) • IP67 Dual-color Models • SAE J845 Class 3 (Amber, Blue, Red, White) • SAE J595 Class 2 (Amber, Red, White) and Class 1 (Blue) • CCR Title 13 Class B (Amber, Blue, Red) • IP67 High Performing Warning Light MicroPulse C Series lights are ideal for police cars, commander and work truck vehicles. The slim-line shape easily mounts on grille, rub rails, or other vertical surfaces. MicroPulse C Series models come in various LED colors including Amber, Blue, Red and White, and dual-color combinations. Single-color models have (6) LEDs and dual-color models have (4) LEDs per color, for a total of (8) LEDs. The advanced high-output LED light head can be programmed to operate as a single unit or synchronize with multiple MicroPulse light heads. Select dual-color C Series models are also available in Steady Burn models for use with the Pathfinder® Siren. The combination of Steady Burn models and the Pathfinder Siren allows the Pathfinder to control lights around the vehicle by utilizing flash patterns in the siren, syncing/alternating light heads, and dimming light heads. Built to Last The MicroPulse C Series lens is made of UV-resistant polycarbonate to protect against harsh conditions. Certified to meet IP67, the MicroPulse C Series has a fully encapsulated water-proof housing that provides a barrier against dust and water. Models come standard with Black bezel and stud mount. Versatile Solution for Warning Light Application Suitable for external mounting applications, each model includes a Black surface mount bezel and a stud mount. Shown below is the MicroPulse C Series installed in the pre-drilled grille of the Ford Police Interceptor Utility, 2016-2019 and 2020-2023. Complete Kit Each model includes light head, Black bezel, surface and stud mount brackets, gaskets, and mounting hardware. Stud mount can be used to install the MicroPulse C Series in the pre-drilled grille of the Ford Police Interceptor Utility, 2016-2019 and 2020-2023 for quick and easy installation.

FEATURES Approvals Single-color Models • SAE J845 Class 2 (Amber, Blue, Red, White) • SAE J595 Class 1 (Amber, Blue, Red, White) • CCR Title 13 Class B (Amber, Blue, Red) • IP67 Dual-color Models • SAE J845 Class 3 (Amber, Blue, Red, White) • SAE J595 Class 2 (Amber, Red, White) and Class 1 (Blue) • CCR Title 13 Class B (Amber, Blue, Red) • IP67 High Performing Warning Light MicroPulse C Series lights are ideal for police cars, commander and work truck vehicles. The slim-line shape easily mounts on grille, rub rails, or other vertical surfaces. MicroPulse C Series models come in various LED colors including Amber, Blue, Red and White, and dual-color combinations. Single-color models have (6) LEDs and dual-color models have (4) LEDs per color, for a total of (8) LEDs. The advanced high-output LED light head can be programmed to operate as a single unit or synchronize with multiple MicroPulse light heads. Select dual-color C Series models are also available in Steady Burn models for use with the Pathfinder® Siren. The combination of Steady Burn models and the Pathfinder Siren allows the Pathfinder to control lights around the vehicle by utilizing flash patterns in the siren, syncing/alternating light heads, and dimming light heads. Built to Last The MicroPulse C Series lens is made of UV-resistant polycarbonate to protect against harsh conditions. Certified to meet IP67, the MicroPulse C Series has a fully encapsulated water-proof housing that provides a barrier against dust and water. Models come standard with Black bezel and stud mount. Versatile Solution for Warning Light Application Suitable for external mounting applications, each model includes a Black surface mount bezel and a stud mount. Shown below is the MicroPulse C Series installed in the pre-drilled grille of the Ford Police Interceptor Utility, 2016-2019 and 2020-2023. Complete Kit Each model includes light head, Black bezel, surface and stud mount brackets, gaskets, and mounting hardware. Stud mount can be used to install the MicroPulse C Series in the pre-drilled grille of the Ford Police Interceptor Utility, 2016-2019 and 2020-2023 for quick and easy installation.

• LED directional warning light • Utilizes MicroPulse Ultra 12 light heads • Externally mounted • Easy serviceability • Available directional patterns include: left, right, center out, and flashing warning • Visor-like extrusion designed to help block sunlight, increasing the warning effectiveness • Compatible with Federal Signal’s SignalMaster controllers • The full-featured controllers include low-power mode to reduce amp draw for nighttime operation and fast mode that increases the “build” speed of the warning pattern • Five-year warranty Features Durable, Directional Warning Solutions Ideal for rear traffic warning, the MicroPulse® SignalMaster™ provides directional signals (left arrow, right arrow, center out) and flashing warning patterns to direct rear-facing traffic. When a directional signal is selected, the lamps are individually illuminated in a sequential sweeping motion until all lamps are illuminated. In addition, the brake module in selected models operate independently from the control module and are located at the center of the MicroPulse SignalMaster. The MicroPulse Ultra lens is made of UV resistant polycarbonate to protect against harsh conditions. Certified to meet IP67, MicroPulse Ultra perimeter lights have a fully encapsulated water-proof housing that provides a barrier against dust, moisture, and water. Additionally, the MicroPulse SignalMaster’s extruded housing is specially designed to help block sunlight and glare that adversely affects warning performance and effectiveness. Easy Serviceability The MicroPulse SignalMaster was designed with ease of serviceability in mind. If you need to replace a light head, remove the screws on each end of the light and disconnect the wire harness connector from the assembly. Reconnect the wire harness to the cable assembly and secure the two screws using the new light head. Different Applications Call for Different Controllers The full-featured SignalMaster controllers, sold separately, operate with a low-power mode to reduce amp draw for nighttime operation and fast mode that increases the “build” speed of the warning pattern. The standard and full-featured controllers provide left, right, center-out and flashing directional warning patterns.

LED directional warning light Lengths offered in 31-, 42-, or 51-inch Stick light models available in (6) and (8) light head versions; Arrow light models available in (10) or (16) light head versions 4200S SignalMaster models have (4) LEDs per light head; 8200S SignalMaster models have (8) LEDs per light head Aluminum housing with rail design (14) flash patterns Discrete cable or serial controller options Low-power mode 12 VdcThree-year warranty Features Performance to Keep You Safe The 4200S/8200S SignalMaster™ is a high-intensity warning system designed to direct traffic approaching from the rear of a stationary vehicle. Equipped with (4) or (8) LEDs per light head, the 4200S/8200S SignalMaster delivers an impressive optical performance suitable for several vehicle applications. These LED directional warning lights are available in (6) and (8) light head version. The arrow-style lights are available with an additional (2) or (4) light head arrows, for a total of (10) or (16) light heads. The 8200S SignalMaster also offers a 10-head split version. Versatility For the Job The full-feature 4200S/8200S SignalMaster comes programmed with (14) eye-catching flash patterns along with left, right, and center-out directional warning. In addition, the rail design allows users to mount with one of our existing SignalMaster brackets. The 4200S/8200S SignalMaster has an 18-inch whip with water-tight connector that is compatible with either our discrete cable or serial 8-button controller. The discrete cables are available in 15-ft or 30-ft lengths. The serial 8-button controller includes a 20-ft cable. In addition, the serial controller offers (2) low-current auxiliary outputs. Optional extension cables are available for both discrete and serial in 15-ft and 30-ft lengths.

FEATURES NightSpire® is a spot and flood LED light built-in one. Engineered with a digitally controlled lens, the NightSpire adjusts from 50-degrees of floodlight to a pinpoint spot light at 4-degrees. This technology not only allows for light versatility, but also decreases the maintenance due to a lack of moving parts within the lens. In addition, the NightSpire offers 360-degrees of continuous rotation which also includes 130-degrees of vertical tilt. NightSpire follows the mounting footprint of Federal Signal’s flagship beacon – the Spire® 100 and 200. This allows for an easy vehicle upgrade without the additional up-fit process. Like the Spire, the NightSpire comes in a permanent and magnet mount base. In addition, the NightSpire is rated IP69K for maximum protection against dust and water which includes pressure wash resistance. NightSpire spot and flood light includes a full-featured wireless controller. Features include an easy-to-grip design, back-lit buttons when activated, and a low maintenance standard AAA battery compatibility. The wireless controller allows for multi-select synchronization, syncing up to three lights with one controller. Lastly, the NightSpire has two memory control functions that allow users to automatically move the spotlight to programmed locations.