Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty
Gamber Johnson Console box - Ford F150 2015-2020, F250-F550 2017+, 2018+ Expedition
Works with the 2018 Pursuit Rated Police Responder Ford F-150 Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money No leg kit needed for installation Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded PEMS for various items for quickly mounting various accessories (mic clips, rear arm rest, side arm rest Verify if vehicle is equipped with floor shifter. If so, please see part 7160-1326 Does NOT work with factory center shifter console option Does NOT work with floor 4X4 shifter option
Gamber-Johnson Getac A140 TRI RF TABLET Cradle (No port replication)
Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence Vesa 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability
Gamber-Johnson Getac A140 NO RF TABLET Cradle (No port replication)
Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability
Gamber-Johnson Getac A140 TRI RF TABLET vehicle docking station
Designed for the Getac A140 tablet computer Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability VESA 75mm mounting pattern
Gamber-Johnson Getac A140 NO RF TABLET vehicle docking station
Designed for the Getac A140 tablet computer Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability Vesa 75mm mounting pattern
Gamber-Johnson Getac K120 TRI RF Tablet Cradle (No port replication)
Compatible with the Getac K120 computer Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety
Gamber-Johnson Getac K120 NO RF Tablet Cradle (No port replication)
Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety
Gamber-Johnson Getac K120 TRI RF Tablet vehicle docking station
Docking station design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrance Upward-facing I/O ports; integrated cable strain relief and cable management system Vesa 75mm mounting pattern Rounded edges to enhance personal safety
Gamber-Johnson Getac K120 NO RF Tablet vehicle docking station
Docking station design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrance Upward-facing I/O ports; integrated cable strain relief and cable management system Vesa 75mm mounting pattern Rounded edges to enhance personal safety
Gamber-Johnson Getac K120 TRI RF LAPTOP Cradle (No port replication)
Compatible with the Getac K120 computer with keyboard Rear corner release button Easily remove the computer with the push of a button Optional lock (keyed alike) for theft deterrence When the computer is closed and screen is latched, the lock will secure the keyboard and computer Screen support is included Access to all computer control buttons and ports while the computer is cradled Composite/aluminum design for reduced weight and durability VESA 75mm mounting pattern Rounded edges to enhance personal safety - Gamber-Johnson rugged construction and reliability
Gamber-Johnson Getac K120 NO RF LAPTOP Cradle (No port replication)
Compatible with the Getac K120 computer with keyboard Rear corner release button. Easily remove the computer with the push of a button Optional lock (keyed alike) for theft deterrence. When the computer is closed and screen is latched, the lock will secure the keyboard and computer Screen support is included Access to all computer control buttons and ports while the computer is cradled Composite/aluminum design for reduced weight and durability Vesa 75mm mounting pattern Rounded edges to enhance personal safety - Gamber-Johnson rugged construction and reliability
Gamber-Johnson Getac K120 NO RF LAPTOP vehicle docking station
Compatible with the Getac K120 computer with keyboard Docking Station design accommodates MSR and rotating hand strap (sold separately) Rear corner release button, easily remove the computer with the push of a button Access to all computer control buttons and ports while the computer is docked Forward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional lock (keyed alike) for theft deterrence. When the computer is closed and screen is latched, the lock will secure the keyboard and computer Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability VESA 75mm mounting pattern
Low profile, no-drill vehicle specific console box Accommodates shifter A traction control/OEM plate (needed only if vehicle has a traction control module) Easily mounts right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable center brace for easy radio installation and wire routing Ships with dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Threaded PEM's provided for rear mounted armrest to the console 1, 12 Volt and 2 switch knock-outs (Located on shifter faceplate) Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will ship fully assembled Includes 3 faceplates and 3 filler panels Horizontal section: Section accommodates 13” of mounting space and is designed to house radio control heads and accessories With traction control faceplate = 7.5” of mounting internal height With traction control faceplate = 10” of mounting space With traction control faceplate and Internal cup holder = 5.5” of mounting space Designed to house full sized devices and accessories Vertical, angled section: Angled section accommodates 5” of mounting space and is designed to house radio control heads and accessories
Base attaches to inboard and outboard passenger side seat rails Riser (included) bolts on to base for added height and moves pole closer to the center of the vehicle Forward seat movement is affected slightly Heavy gauge steel construction for long-term durability Black powder coat finish for maximum corrosion resistance Support brace recommended (item no. 7160-0230)
Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1" backwards and 2" forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise