Gamber-Johnson KIT: Getac T800 TRI RF dock (7160-0565-03) and LIND 90W power adapter w/cigarette lighter connector (#7300-0463)
Designed for the Getac T800 8.1-inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability External power supply: 90W Lind Auto Adapter (Item No. 15110) is included
Gamber-Johnson KIT: Getac T800 NO RF dock (7160-0565-00) and LIND 90W power adapter w/cigarette lighter connector (#7300-0463)
Designed for the Getac T800 8.1-inch rugged tablet computers Access to all computer function buttons and ports while tablet is docked VESA 75mm and Gamber-Johnson mounting patterns located on the back of the dock POGO pin style docking connector for easy docking activation Alignment pins guide the computer for easy docking and connectivity Downward-facing I/O ports; cable strain relief system for easy cable management Docking Station design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and dock computer Composite/aluminum design for reduced weight and durability External power supply: 90W Lind Auto Adapter (Item No. 15110) is included
Gamber-Johnson KIT: Getac V110 TRI RF dock (7160-0515-03) and LIND 90W power adapter w/cigarette lighter connector (#7300-0463)
Compatible with Getac V110 convertible computer Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75mm mounting pattern External power supply: Lind Auto Adapter ( Item No. 7300-0463 ) is included Screen support is included with the dock
Gamber-Johnson KIT: Getac V110 NO RF dock (7160-0515-00) and LIND 90W power adapter w/cigarette lighter connector (#7300-0463)
Compatible with Getac V110 convertible computer Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75 mounting pattern External power supply: Lind Auto Adapter ( Item No. 7300-0463 ) is included Screen support is included with the dock
Gamber-Johnson Kit, RAM Promaster (2014+) Van Vehicle Base - 7160-0527, DS-LOWER-7, 7160-0178, 7160-0230, 7160-0500
The Ram ProMaster pedestal system kit is constructed of heavy-duty steel for long-lasting use. It attaches between the passenger seat pedestal and seat rails to secure your entire mounting system. Must order as is. There are no substitutions.
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder, Armrest, USB/AUX Input Faceplate, Wings. Includes 3 faceplates and 3 filler panels.
Kit includes: Vehicle Specific Console with Cup Holder, Armrest, USB AUX Input Faceplate, and Tahoe Wings Low profile, no-drill vehicle specific console for the Chevy Tahoe (2016), Chevy Silverado 1500 (2015-2016), and Chevy Silverado 2500/3500/HD (2016) Vehicle Specific Console with armrest and cup holder Attaches directly to the Chevy Tahoe and Silverado vehicles without the need to order a separate top plate, leg kit is provided with the 7170 - 0237 kit number Console box works with Manual 4x4 shift lever Horizontal, low profile section: Horizontal, low profile section accommodates 7" (17.78 cm) of mounting space including internal cup holder (or 11.5" without cupholder) Designed to house fill sized devices and accessories Vertical, angled sections: Accommodates 1 to 2 full sized devices (7.5” of mounting space) Two 12 volt plug inserts (located on passenger side) USB/MP3/SD card from factory console can be relocated on the passenger side using the provided knock-outs or by the relocation faceplate (Item No. 15250) Front plate of console (underneath dash) has placement for a power distribution block or Lind shut-down timer using pre-configured mounted holes Tahoe Wings bolt onto the front of the console to cover/hide the wires for a finished look and provides relocation of power outlets knockouts and aftermarket knockouts Box will ship fully assembled (except for accessories) Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern” On the 3-bolt pattern closer to the driver for easy articulation access Fully welded construction for long term product life span 3 faceplates and 3 filler panels are included
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder, Armrest, USB/AUX Input Faceplate, Side Pocket, Wings. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item #15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 7” (17.78 cm) of mounting space and is designed to house radio control heads and accessories (included cup holder uses 4.5" (11.43 cm) of that space) 3 faceplates and 3 filler panels are included Box ships fully assembled (except for accessories) Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder, Vertical Surface Mount w/ Hardware Bag. Includes 3 faceplates and 3 filler panels.
Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder and 7160-0500. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder and 7160-0220. Includes 3 faceplates and 3 filler panels.
Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250. Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder, Wire /Cable Chase and 7160-0220. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250 ) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder and Wire /Cable Chase. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) and Wire /Cable Chase. Includes 3 faceplates and 3 filler panels.
Attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box ships fully assembled 3 faceplates and 3 filler panels are included
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 7" (17.78 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck). Includes 3 faceplates and 3 filler panels.
Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250). Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 11.5" (29.2 cm) of mounting space and is designed to house radio control heads and accessories. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.