Gamber-Johnson

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile, no-drill vehicle-specific console box 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Console box ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs ( 4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Must order as is. There are no substitutions for accessories. Accessories may need to be assembled. Includes 3 faceplates and 3 filler panels

Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (5), 12 Volt knockouts (4 on the back and 1 on driver side) USB and MP3 knockouts from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (4) 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Console attaches to transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (4) 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Includes 3 faceplates and 3 filler panels Only the console box ships fully assembled (molded dash panels must be installed on-site) Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Must order as is. There are no substitutions.

Must order as is. There are no substitutions.

Heavy gauge steel, fully welded constructed for long-term durability. Black powdercoat finish for maximum corrosion resistance. Low profile vehicle specific console box. Six (6) fasteners for mounting to transmission hump. A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side. Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them. Four (4) 12 Volt knockouts located on passenger side. Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern. Console box ships fully assembled with 3 faceplates and 3 filler panels.

Low profile vehicle specific console Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 volt plug insert located on passenger side Factory USB and audio jack must be relocated using Item No. 16648 & 15082 or 16648 & 15083, if you want to use them Computer can be mounted in the off set position on the smiley face pattern located on the top of the console (accommodates any universal display bracket mount or any Gamber-Johnson motion attachment ordered separately) Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house full-sized radios Threaded PEM® provided for mounting armrest to the console Console box ships fully assembled 3 faceplates and 3 filler panels are included but not assembled

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplate and 3 filler panels are included Console box ships fully assembled (except for accessories)

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplates and 3 filler panels included Console box ships fully assembled (except for accessories)

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios Heavy gauge steel, fully welded constructed for long-term durability. Black powder coat finish for maximum corrosion resistance 3 faceplates and 3 filler pane is included Console box ships fully assembled (except for accessories)

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplates and 3 filler panels included Console box ships fully assembled (except for accessories)

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four 12-Volt knockouts (located on passenger side) USB and MP3 knockouts for aftermarket module: (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplates and 3 filler panels are included Console box ships fully assembled (except for accessories). Must order as it. There are no substitutions for accessories included with the kit. Accessories may need to be assembled Horizontal, low profile section: Accommodates 6.5" (15.2 cm) of mounting space with a cup holder, and 11" (27.9 cm) of mounting space without a cup holder installed Designed to house radios, control heads and accessories Vertical, angled section : Accommodates 7.5" (19.1 cm) of mounting space to house 1 to 2 full-sized radios or devices

Kit includes: Vehicle Specific Console, Cup Holder, Armrest and Filler Panel (Three Switch and Three Cigarette Jack Knockouts) Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four, 12 Volt knock-outs (Located on passenger side) USB and MP3 knock-outs for aftermarket module: (PN 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section: Section accommodates 11” of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to the transmission hump (does not require a Leg Kit or Top Plate) A removable top plate and center brace for easy radio installation and wire routing Four 12 Volt knock-outs (located on passenger side) USB and MP3 knock-outs for aftermarket module (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section : Section accommodates 11” of mounting space and is designed to house radio control heads and accessories Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Low profile, no-drill vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Horizontal, low profile section accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios Heavy gauge steel, fully welded constructed for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplate and 3 filler panels are included Console box ships fully assembled (except for accessories) Must order as is. There are no substitutions for accessories. Accessories may need to be assembled

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Three (3) faceplates and 3 filler panels are included Console box ships fully assembled (except for accessories)