Consoles & Mounts

Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 )

Complete your install look with the carpet covering (black) Carpet covering helps keep small items from going under the OEM carpet; i.e. pens and coins Four (4) slotted holes allow for fine tuning the console alignment between front seats Works with our 29" and 23" top plates as wells as the 7160-0548 console box Uses same seat bolts used for the center seat for ease of install

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Sturdy for additional support Sleek, padded armrest flips up for convenience Adjust forward and back on mounting points about ¾ of an inch - with tool Adjust height down up to 3 inches - shipped in top height position Works on both sides of console boxes Allows for console box hold down rail to be removed or positioned correctly

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Lid latches in place without needing to be locked Lid can be secured with the push button lock for added security Ideal for securing keys and other miscellaneous items Black powder coat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability

Locking lid with barrel key lock Ideal for weapons, keys and other miscellaneous items Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Heavy gauge steel construction for long-term durability. Black powdercoat finish for maximum corrosion resistance. Legs attach to both short and long MCS Top Plates (Item No. 7160-0085 or 7160-0086). Leg kit is NOT compatible with legacy Ford F-150 trucks.

Sturdy for additional support Height-adjustable Padded armrest flips up for convenience Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

MCS Vehicle Leg Kit is not compatible with legacy Ford F-250 trucks Legs attach to both short and long MCS Top Plates ( 7160-0085 or 7160-0086 ) Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1" backwards and 2" forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1" backwards and 2" forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise Vertical Surface mount for mounting on the back of console boxes

Black powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Lockbox and armrest swivels 100 degrees from driver Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1 inch backwards and 2 inches forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise Vertical Surface mount for mounting on the back of console boxes

The front plate of the console has placement for a power distribution block or LIND shut-down timer using pre-configured mounted holes Fully welded construction for long term product life span Wiring chase bolts onto the front of the console to conceal the wires for a finished look and is adjustable to fit both the Tahoe and Silverado. May NOT fit all vehicles Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on the passenger side using the provided knock-outs or by purchasing a separate relocation faceplate Computer can be mounted in 2 locations: Off-set towards the passenger on the "smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Ships fully assembled (except for accessories) with 3 faceplates and 3 filler panels Does not require a top plate

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1" backwards and 2" forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 5" lower pole for mounting on the top plate or short versions console boxes with mounting slots

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1" backwards and 2" forward Armrest pad slides over latch - Lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 7" lower pole for mounting on the top plate or short versions console boxes with mounting slots

Low profile, no-drill vehicle-specific console box 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate Vertical, angled section accommodates 7.5” of mounting space and is designed to house full-sized radios Horizontal, low profile section accommodates 13” of mounting space and is designed to house radio control heads and accessories A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver's side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers

Low profile, no-drill vehicle-specific console box Shorter console box allows for more room when mounting weapons on the prisoner cage 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be centered or off-set towards the passenger on the “smiley face pattern” Will ship fully assembled (molded dash panels must be installed on-site) 3 faceplates and 3 filler panels are included Console box is not compatible with legacy Dodge Chargers Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console