Consoles & Mounts

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Installs easily with no drilling required Low-profile design for ease of egress across front seats of vehicle Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Note: No OEM relocation is required

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console Dual cup/pen holder is removable for easy cleaning

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to the transmission hump (does not require a Leg Kit or Top Plate) A removable top plate and center brace for easy radio installation and wire routing Four 12 Volt knock-outs (located on passenger side) USB and MP3 knock-outs for aftermarket module (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section : Section accommodates 11” of mounting space and is designed to house radio control heads and accessories Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests.

Low profile, no-drill vehicle specific console box Accommodates shifter A traction control/OEM plate (needed only if vehicle has a traction control module) Easily mounts right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable center brace for easy radio installation and wire routing Ships with dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Threaded PEM's provided for rear mounted armrest to the console 1, 12 Volt and 2 switch knock-outs (located on shifter faceplate) Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Will ship fully assembled Includes 3 faceplates and 3 filler panels Horizontal section: Accommodates 13" of mounting space without cup holder and is designed to house radio control heads and accessories With traction control faceplate = 7.5” of mounting internal height With traction control faceplate = 10” of mounting space With traction control faceplate and Internal cup holder = 5.5” of mounting space Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 5” of mounting space and is designed to house radio control heads and accessories

Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests

Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Padded armrest flips up for convenience Included rear wire cover will meet up directly to Ford 85R if present

Attaches to the vehicle without the need to order a separate top plate (leg kit is provided with the console box) Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console using faceplate (item no. 15250) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box ships fully assembled 3 faceplates and 3 filler panels are included

Low profile vehicle specific console Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 volt plug insert located on passenger side Factory USB and audio jack must be relocated using Item No. 16648 & 15082 or 16648 & 15083, if you want to use them Computer can be mounted in the off set position on the smiley face pattern located on the top of the console (accommodates any universal display bracket mount or any Gamber-Johnson motion attachment ordered separately) Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house full-sized radios Threaded PEM® provided for mounting armrest to the console Console box ships fully assembled 3 faceplates and 3 filler panels are included but not assembled

Kit includes: Vehicle Specific Console, Cup Holder, Armrest and Filler Panel (Three Switch and Three Cigarette Jack Knockouts) Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four, 12 Volt knock-outs (Located on passenger side) USB and MP3 knock-outs for aftermarket module: (PN 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section: Section accommodates 11” of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space. Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Installs easily with no drilling required Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort *No OEM relocation is required

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Pen holder included for quick access and storage Padded armrest flips up for convenience Included rear wire cover will meet up directly to Ford 85R if present

A fully loaded mobile office for your Ford Police Interceptor Utility. The new short console box holds everything an officer needs without getting in the way of his or her side firearm or the vehicle’s gun rack. The top angled portion of the console box will house 1-4 full sized radio control heads or devices while the horizontal low-profile section will hold more control heads, short sized devices, and accessories. Located on the passenger side are four 12-volt knock-outs, a USB, and an MP3 knock-out to power your aftermarket equipment such as a cell phone, radar gun, hotspot, or a computer power supply.

Installs easily with no drilling required Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility Vertical Mount provides flexibility to use the armrest of your preference for optimal comfort 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments *No OEM relocation is required

Low profile, no-drill vehicle-specific console box 5 fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Console box ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs ( 4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Must order as is. There are no substitutions for accessories. Accessories may need to be assembled. Includes 3 faceplates and 3 filler panels

Low profile vehicle-specific console box Console attaches to transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Padded armrest flips up for convenience Filler panel ships solid; knock out what is needed for installation Included rear wire cover will meet up directly to Ford 85R if present