Vehicle Equipment

Designed to MIL-STD 810G test procedures Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Front safety bracket and rear corners ensure proper alignment This cradle accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release Insert computer and push latch closed to secure computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability

Heavy gauge steel, fully welded constructed for long-term durability. Black powdercoat finish for maximum corrosion resistance. Low profile vehicle specific console box. Six (6) fasteners for mounting to transmission hump. A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side. Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them. Four (4) 12 Volt knockouts located on passenger side. Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern. Console box ships fully assembled with 3 faceplates and 3 filler panels.

The ALL-NEW 2020+ Ford Police Interceptor® Utility and 2020+ Ford Explorer pedestal kit creates a rugged and reliable foundation for your mobile workspace.

Compatible with the Getac ZX10 tablet Cradle accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is cradled One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Designed for the Getac ZX70 tablet computer and backwards compatible with the Z710 tablet Kit includes Getac ZX70 charging cradle (7160-1135-01) and LIND isolated power adapter (16411) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle POGO connector for reliable charging Power cable strain relief Cradle design accommodates rotating hand strap (sold separately) Access to all tablet control buttons and USB port while tablet is cradled Optional lock (keyed alike) for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Extremely light-weight composite/aluminum design VESA 75 mounting pattern

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Lockbox and armrest swivels 100 degrees from driver Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1 inch backwards and 2 inches forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 5 inch lower pole for mounting on the top plate or short versions console boxes with mounting slots

Black Powdercoat finish for maximum corrosion resistance Heavy gauge steel construction for long-term durability Convenient flip-up lockbox and armrest Lockbox and armrest swivels 100 degrees from driver Flip-up lid allows for access to storage area Lid has latch-lock combination with easy latching Locking is done with barrel key Armrest pad adjusts about 1 inch backwards and 2 inches forward Armrest pad slides over latch - lock mechanism to help conceal it Interior storage area lined with padding to protect items and reduce noise 7 inch lower pole for mounting on the top plate or short versions console boxes with mounting slots

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Composite/aluminum design for reduced weight and durability

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Vehicle specific design for a custom fit Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Low profile vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing. 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Computer can be mounted on top of the console box and be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded constructed for long-term durability Black powder coat finish for maximum corrosion resistance Horizontal, low profile section Accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Vertical, angled section Accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios 3 faceplates and 3 filler panels included Console box ships fully assembled (except for accessories)

Compatible with the Getac UX10 tablet computer Kit includes (7160-1815-00) NO RF Cradle + (17057) Getac 120W Auto Power Adapter Cradle design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console

Compatible with Getac V110 convertible computer Cradle can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front safety bracket helps align computer Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch Insert computer and push latch closed to secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Screen support is included with the dock

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Pen holder included for quick access and storage Included rear wire cover will meet up directly to Ford 85R if present

A fully loaded mobile office for your Ford Utility Police Interceptor. The new short console box holds everything an officer needs without getting in the way of his or her side firearm or the vehicle’s gun rack. The top angled portion of the console box will house 1-4 full sized radio control heads or devices while the horizontal low-profile section will hold more control heads, short sized devices, and accessories. Located on the passenger side are four 12-volt knock-outs, a USB, and an MP3 knock-out to power your aftermarket equipment such as a cell phone, radar gun, hotspot, or a computer power supply.

Small footprint designed to maximize available space Rear hooks and guide pins ensure proper alignment and docking connectivity Plate draws back into docking station when the computer is docked Docking station designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately)