Vehicle Equipment

Designed for the Getac A140 tablet computer Cradle design accommodates tablet’s built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is cradled Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Optional keyed lock for theft deterrence Vesa 75mm mounting pattern Rounded edges to enhance personal safety Composite/aluminum design for reduced weight and durability

Low profile vehicle-specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five (4) 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Low profile vehicle specific console box Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Box ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Compatible with the Getac UX10 tablet computer Cradle design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) TRI RF antenna pass through for reliable connectivity Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrence Vesa 75mm mounting pattern Rounded edges to enhance personal safety

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Low profile, no-drill vehicle specific console box Accommodates shifter A traction control/OEM plate (needed only if vehicle has a traction control module) Easily mounts right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable center brace for easy radio installation and wire routing Ships with dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Threaded PEM's provided for rear mounted armrest to the console 1, 12 Volt and 2 switch knock-outs (Located on shifter faceplate) Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Will ship fully assembled Includes 3 faceplates and 3 filler panels Horizontal section: Section accommodates 13” of mounting space and is designed to house radio control heads and accessories With traction control faceplate = 7.5” of mounting internal height With traction control faceplate = 10” of mounting space With traction control faceplate and Internal cup holder = 5.5” of mounting space Designed to house full sized devices and accessories Vertical, angled section: Angled section accommodates 5” of mounting space and is designed to house radio control heads and accessories

Vehicle specific design for a custom fit Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Utilize existing armrests with the vertical side mount for a hassle free transition from console to console Dual cup/pen holder is removable for easy cleaning Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments Includes knockouts for one 12V, one USB, and OEM relocations

Compatible with the Getac K120 computer Kit includes NO RF cradle (7160-1085-00) + Getac 120W auto power adapter ( 7300-0471 ) Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety

Heavy gauge steel, fully welded construction for long-term durability. Black powder coat finish for maximum corrosion resistance. Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side. USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250). Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes. Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access. Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09. Horizontal, low profile section accommodates 11.5" (29.2 cm) of mounting space and is designed to house radio control heads and accessories. Box will ship fully assembled. 3 faceplates and 3 filler panels are included. Console box works with manual 4x4 shift lever. Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Vehicle specific design for a custom fit Dual cup/pen holder is removable for easy cleaning Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing Utilize existing armrests with the vertical side mount for a hassle free transition from console to console 3-hole pattern included on the top plate provides a secure mounting location for motion attachments Includes knockouts for one 12V, one USB, and OEM relocations

Access to all tablet control buttons and ports while the tablet is docked Adjustable front hooks can be set to accommodate the Dell Latitude 12 and 14 Rugged Extreme and 14 Rugged laptop computers Front-facing docking/release latch Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern

Installs easily with no drilling required Low-profile design for ease of egress across front seats of vehicle Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Note: No OEM relocation is required

Shortened length provides extra clearance for weapon retrieval Installs easily with no drilling required Featuring a removable top plate for easy installation of radios and wire routing 3-hole pattern included on the top plate provides a secure mounting location for motion attachments OEM Power option can be relocated with supplied 2” faceplate or passenger side of console Dual cup/pen holder is removable for easy cleaning

Compatible with the Dell Latitude 7230 Rugged Extreme tablet computer Accommodates the tablet’s hand strap or magnet mount attachment Access to all tablet control buttons and ports while the tablet is docked QUAD RF pass-through for additional connectivity One-handed docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson's rugged construction and reliability Composite design for reduced weight and durability VESA 75 mounting pattern with 1/4-20 mounting studs for easy mounting with Gamber-Johnson mounts and motion attachments

Small footprint designed to maximize available space. Rear hooks and guide pins ensure proper alignment and docking connectivity. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durability. Screen support is included with the dock. Comes with a power supply bracket to attach the LIND power supply to the bottom of the dock.

Compatible with the Dell Latitude 7230 Rugged Extreme Tablet with the Dell Latitude 7230 Rugged Extreme Attachable Keyboard Accommodates the tablet’s hand strap or magnet mount attachment Access to all tablet control buttons and ports while the tablet is docked One-handed docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson's rugged construction and reliability Composite design for reduced weight and durability VESA 75 mounting pattern with 1/4-20 mounting studs for easy mounting with Gamber-Johnson mounts and motion attachments

Compatible with the Getac K120 computer Kit includes TRI RF cradle (7160-1085-03) + Getac 120W auto power adapter ( 7300-0471 ) Cradle design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety

Compatible with the Getac K120 computer with keyboard Rear corner release button. Easily remove the computer with the push of a button Optional lock (keyed alike) for theft deterrence. When the computer is closed and screen is latched, the lock will secure the keyboard and computer Screen support is included Access to all computer control buttons and ports while the computer is cradled Composite/aluminum design for reduced weight and durability Vesa 75mm mounting pattern Rounded edges to enhance personal safety - Gamber-Johnson rugged construction and reliability

Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests.