Vehicle Equipment

Must order as is. There are no substitutions.

Compatible with Panasonic Toughbook 33 VESA 75mm hole pattern Can be mounted in horizontal or vertical position Internal/protected circuit board protects against dirt and dust Floating docking connector for reliable docking connection Optional lock (keyed alike) to keep your computer safe Accommodates either a tablet’s hand strap or an additional battery pack Rounded edges to enhance personal safety Rugged construction for long-term durability

Low profile, no-drill vehicle specific console box Accommodates shifter A traction control/OEM plate (needed only if vehicle has a traction control module) Easily mounts right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable center brace for easy radio installation and wire routing Ships with dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Threaded PEM's provided for rear mounted armrest to the console 1, 12 Volt and 2 switch knock-outs (located on shifter faceplate) Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Will ship fully assembled Includes 3 faceplates and 3 filler panels Horizontal section: Accommodates 13" of mounting space without cup holder and is designed to house radio control heads and accessories With traction control faceplate = 7.5” of mounting internal height With traction control faceplate = 10” of mounting space With traction control faceplate and Internal cup holder = 5.5” of mounting space Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 5” of mounting space and is designed to house radio control heads and accessories

Compatible with the Getac UX10 tablet computer Kit includes (7160-1815-03) TRI RF Cradle + (17057) Getac 120W Auto Power Adapter Cradle design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) Easy to use one-handed operation: Insert bottom of computer into the cradle, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the cradle Access to all tablet control buttons and ports while tablet is cradled TRI RF antenna pass through for reliable connectivity Optional keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety

Cradle can be used in tablet or laptop position. Rugged aluminum construction with black powder coat finish for long-term durability. Front safety bracket helps align computer. Built-in stylus holder. Push button latch with keyed lock for theft deterrence: Push the latch Insert computer and push latch closed to secure computer Use External power supply: Lind Auto Adapter (Item No. 15110). Screen support is included with the cradle.

Compatible with Panasonic Toughbook 54 and 55 computers Aluminum construction for strength and durability Captured key lock with auto-latching mechanism ensures user safety, protection and device security Ergonomic design for safety and single hand operation Minimal footprint for increased usable cabin space Universal mounting interface including VESA 75 for optimum compatibility with new and existing infrastructure

Small footprint designed to maximize available space Rear hooks and guide pins ensure proper alignment and docking connectivity Plate draws back into docking station when the computer is docked Cradle designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately)

Compatible with the Panasonic Toughbook 20 and G2 2-in-1 tablet computers with attachable keyboards Panasonic Certified electronics Spring-loaded cover protects docking connector when computer is not docked, automatically retracts for superior protection Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Can be used in either laptop or tablet orientation. Composite/aluminum design for reduced weight and durability Designed with rounded edges to enhance personal safety Rear-facing I/O ports; integrated cable strain relief and cable management system Access to all notebook control buttons and ports while the notebook is docked Keyed lock for theft deterrence. NOTE: The lock secures the Toughbook 20 keyboard and tablet, but secures only the keyboard for the G2. VESA 75 mm mounting pattern 3-year limited warranty

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Kit includes NO RF docking station ( Item No. 7160-1416-00 ) + LIND 11-16V auto power adapter ( Item No. 7300-0460 ) Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with Dual RF ( Item No. 7170-0832-02 )

Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests

Access to all computer control buttons and most ports while docked Designed to the footprint of the computer to preserve cabin space Right-facing docking/release latch for easy docking and undocking Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern for compatibility with a variety of Gamber-Johnson motion attachments

Compatible with the Panasonic Toughbook A3 tablet computer Panasonic Certified electronics Docking station design accommodates the A3 tablet hand strap with the extended battery Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Downward-facing I/O ports; integrated cable strain relief and cable management system DUAL RF antenna pass through for reliable connectivity Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Available with NO RF ( Item No. 7160-1416-00 )

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to the transmission hump (does not require a Leg Kit or Top Plate) A removable top plate and center brace for easy radio installation and wire routing Four 12 Volt knock-outs (located on passenger side) USB and MP3 knock-outs for aftermarket module (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Box will ship fully assembled (except for accessories) Includes 3 faceplates and 3 filler panels Horizontal, low profile section : Section accommodates 11” of mounting space and is designed to house radio control heads and accessories Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 7.5” of mounting space and is designed to house full sized radios Accommodates 1 to 2 full sized devices

Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included Cup holders are removable for easy cleaning Padded armrest flips up for convenience Included rear wire cover will meet up directly to Ford 85R if present

Attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space and is designed to house 1 to 2 full sized radios or a larger radio such as the Motorola APX 09 Horizontal, low profile section accommodates 8” (20.3 cm) of mounting space and is designed to house radio control heads and accessories. The included cup holder uses 4.5" (11.43 cm) of that space Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance

Compatible with the Panasonic Toughpad FZ-G1 and Toughbook G2 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Getac certified electronics Compatible with the Getac ZX10 tablet Docking station accommodates the tablet's card reader, extended battery, hand strap, stylus, barcode reader, and hard carry handle Access to all tablet control buttons and ports while the tablet is docked Docking connector gasket provides additional water resistance and protection. Downward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments One-hand docking and release for efficient use all day long Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern