Vehicle Equipment

Compatible with the Getac K120 computer with keyboard Docking Station design accommodates MSR and rotating hand strap (sold separately) Rear corner release button, easily remove the computer with the push of a button Access to all computer control buttons and ports while the computer is docked Forward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional lock (keyed alike) for theft deterrence. When the computer is closed and screen is latched, the lock will secure the keyboard and computer Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability VESA 75mm mounting pattern

No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box. Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate (item no. 15250 ) Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: Off-set towards the passenger on the “smiley face pattern" On the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included

Installation is fast and easy using existing OEM mounting points Knockouts are located on the front, side, and angled section of console for maximum flexibility and usability of 12V outlets and other accessories Push-button locking storage compartment secures valuables Threaded PEMS quickly mount various accessories (mic clips, rear arm rest, side arm rest) If vehicle is equipped with floor shifter, please see part 7160-1326 Does NOT work with factory center shifter console option Does NOT work with floor 4X4 shifter option

Works with Ford F-Series Trucks with the Floor 4X4 shifter Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded pems and studs for various items for quickly mounting various accessories (mic clips and arm rests)

Uses Panasonic Toughbook Certified electronics for reliable connectivity Access to all computer control buttons and most ports while docked Rear-facing I/O ports; integrated cable strain relief and cable management system LED indicator light reflects docking connection to ensure proper docking Shutter cover for extra docking connector protection Designed to the footprint of the computer to preserve cabin space Right-facing docking/release latch for easy docking and undocking Keyed lock for theft deterrence Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability VESA 75mm mounting pattern for compatibility with a variety of Gamber-Johnson motion attachments

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Low profile, no-drill vehicle specific console box Six (6) fasteners for mounting to transmission hump A removable top and center plate for easy radio installation and wire routing 12 Volt plug insert located on passenger side Factory USB and audio jack must be relocated using item no. 16648 & 15082 or 16648 & 15083 if you want to use them Four (4) 12 Volt knockouts located on passenger side Horizontal, low profile section accommodates a mounting space of 11” (27.9 cm) long to house radio control heads, full-sized devices and accessories Vertical, angled section accommodates 7.5” (19.1 cm) of mounting space to house 1 to 2 full-sized radios Heavy gauge steel, fully welded constructed for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplate and 3 filler panels are included Console box ships fully assembled (except for accessories) Must order as is. There are no substitutions for accessories. Accessories may need to be assembled

Small footprint designed to maximize available space. Rear-facing I/O ports, integrated cable strain relief system, and convenient cable management system. Rear hooks and guide pins ensure proper alignment and docking connectivity. Spring-loaded docking connector to ensure connectivity in the roughest terrain. Plate draws back into docking station when the computer is docked. Docking station designed to accommodate optional VGA attachments. Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern. Rugged composite/steel construction with black powder coat finish for long-term durabililty. Screen support is included with the dock. Comes with a power supply bracket to attach the Getac power supply (Item No. 17057) to the bottom of the dock.

Compatible with Getac's B360 and B360 Pro rugged computers Getac Certified electronics Floating docking connector with steel guide pins to ensure a reliable connection even in the most rugged environments Front corner release latch, easily remove the computer by activating the latch Access to all computer control buttons and ports while the computer is docked Rear-facing I/O ports; integrated cable strain relief and cable management system Screen support for additional stability (included) Keyed lock for theft deterrance Vesa 75mm mounting pattern Rounded edges to enhance personal safety 3-year limited warranty Available with TRI RF (Item No. 7170-0789-03)

Installs easily with no drilling required In-console printer mount with push-button lock, safely stores the Brother PocketJet printer while still maintaining easy accessibility for paper replacements and maintenance Push-button locking side pocket keeps valuables secure while out in the field Wide Body design maximizes mounting space between the front seats Magnetic phone holder positions phone wherever needed for easy accessibility Dual cup/pen holder is removable for easy cleaning Notes: Printer is not included OEM USB relocation knockout is located on the passenger side of the console box

Compatible with Getac V110 convertible computer Getac electronics Docking station can be used in tablet or laptop position Rugged aluminum construction with black powder coat finish for long-term durability Front-facing l/O ports, integrated cable strain relief system POGO pin style docking connector for easy docking activation Front safety bracket helps align computer for proper docking connectivity Built-in stylus holder Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer VESA 75mm mounting pattern External power supply: Lind Auto Adapter ( Item No. 7300-0463 ) is included Screen support is included with the dock

Installs easily with no drilling required Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility The Mongoose®-9" Locking Slide Arm with Short Clevis has 45 degree forward tilt capabilities and 360 degree swivel capabilities for easy viewing of laptops and devices 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments *No OEM relocation is required

Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna