Gamber-Johnson

Attaches to the passenger side floor, under seat rails Can be used with factory installed console A Support Brace (Item no. 7160-0230) is highly recommended. Heavy gauge steel construction for long-term durability Black powdercoat finish for maximum corrosion resistance Note : Due to inboard seat rail only having one pre-drilled hole, we strongly recommend drilling another hole due to the weight of the equipment is on that rail. Rearward travel of the passenger seat is not affected, however there is limited forward seat travel.

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Special docking connector pin protection – helps to prevent accidental pin damage by providing additional protection around and in between each docking pin Designed to MIL-STD 810G test procedures and complies with FCC Class A standards Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Rear-facing l/O ports, integrated cable strain relief system, and convenient cable management system Spring-loaded docking connector to ensure connectivity in the roughest terrain Front safety bracket and rear corners ensure proper alignment and docking connectivity Spring-loaded plate protects RF connector from damage when computer is not in the docking station. Plate draws back into the docking station when the computer is docked. This docking station accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release the docking connector Insert computer and push latch closed to dock computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability Antenna switch position: Switch set toward outside of dock: Uses exterior antenna Switch set to inside of the dock: Uses laptop antenna

Designed to MIL-STD 810G test procedures Small footprint - designed to maximize available space inside of vehicle Gamber-Johnson has worked with Panasonic to perform the appropriate tests needed to qualify a product as Toughbook Certified Front safety bracket and rear corners ensure proper alignment This cradle accommodates the optional modular expansion area on the Toughbook 54/55 computer Special access area for smart card reader makes it easy to insert and eject card Push button latch with keyed lock for theft deterrence: Push the latch to release Insert computer and push latch closed to secure computer Can be used with Motion Attachments with the VESA 75mm hole pattern only Rugged composite/steel construction with black powder coat finish for long-term durability

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Use External power supply: Lind Auto Adapter (Item No. 15110) Composite/aluminum design for reduced weight and durability

Designed for the Getac T800 8.1-inch rugged tablet Access to all computer function buttons and ports while tablet is inserted VESA 75mm and Gamber-Johnson mounting patterns located on the back of the cradle Alignment pins guide the computer for easy cradling Cradle design accommodates SnapBack SmartCard & RFID reader and X-Hand Strap (sold separately) Push and Turn lock with key for theft deterrence Insert computer then push down and turn lock to close and secure computer Composite/aluminum design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Compatible with the Panasonic Toughpad FZ-G1 tablet computers with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Heavy gauge steel contruction for long-term durability. Black powdercoat finish for maximum corrosion resistance. Drainage holes located in the bottom of the pocket. Ideal for holding pens, keys and other miscellaneous items.

Compatible with the Panasonic Toughpad FZ-G1 tablet computer with small bumper guards Cradle is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the cradle, push top of cradle down and engage lock to dock computer Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability

Small footprint designed to maximize available space Rear-facing I/O ports, integrated cable strain relief system, and convenient cable management system Rear hooks and guide pins ensure proper alignment and docking connectivity Spring-loaded docking connector to ensure connectivity in the roughest terrain Plate draws back into docking station when the computer is docked Docking station designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75 mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately) External power supply sold separately

Small footprint designed to maximize available space Rear-facing I/O ports, integrated cable strain relief system, and convenient cable management system Rear hooks and guide pins ensure proper alignment and docking connectivity Spring-loaded docking connector to ensure connectivity in the roughest terrain Plate draws back into docking station when the computer is docked Docking station designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately) External power supply sold separately

Small footprint designed to maximize available space Rear hooks and guide pins ensure proper alignment and docking connectivity Plate draws back into docking station when the computer is docked Docking station designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately)

Small footprint designed to maximize available space Rear hooks and guide pins ensure proper alignment and docking connectivity Plate draws back into docking station when the computer is docked Cradle designed to accommodate optional VGA attachments Can be used with Gamber-Johnson motion attachments with the VESA 75mm hole pattern Rugged composite/steel construction with black powder coat finish for long-term durability Screen support is included with the dock Optional power supply bracket (7120-0736) to attach Getac power supply to the bottom of the dock (sold separately)