Vehicle Equipment

VESA 75mm hole pattern Lock (keyed alike) for theft deterrence. When locked, neither the tablet nor the keyboard can be removed from the cradle Rounded edges to enhance personal safety Rugged construction for long-term durability

Must order as is. There are no substitutions.

Must order as is. There are no substitutions.

Mount and position your computer with ease with our ALL-NEW2020+ Ford Police Interceptor® Utility and 2020+ Ford Explorer pedestal kit with 9" locking slide arm.

Mount and position your computer with ease with our ALL-NEW 2020+ Ford Police Interceptor® Utility and 2020+ Ford Explorer pedestal kit with 9" locking slide arm (short clevis).

2019+ RAM 1500 pedestal kit. Mount your computer with the ruggedness needed to get the job done. Using the existing passenger-side front seat bolts, this base creates a quick and easy setup.

Compatible with the Getac UX10 tablet computer Kit includes (7160-1813-00) NO RF Docking Station + (17057) Getac 120W Auto Power Adapter Docking station design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrence Downward-facing I/O ports; integrated cable strain relief and cable management system VESA 75mm mounting pattern Rounded edges to enhance personal safety

Docking station design accommodates the rotating hand strap with the extended battery, or the hard handle, RFID reader, and smartcard reader (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrence Downward-facing I/O ports; integrated cable strain relief and cable management system VESA 75mm mounting pattern Rounded edges to enhance personal safety

Full depth accommodates one-piece radios and controls Easy installation, no OEM parts to be removed Side mount configuration maximizes in-console mounting space OEM 12V/USB relocation, switch knockout, and 12V knockout included with no loss of mounting space Padded armrest flips up for convenience

Must order as is. There are no substitutions.

Securely mount your tablet or computer with the 2021+ Chevrolet Tahoe and  2021+ GMC Yukon Pedestal Kit featuring the Mongoose® 9" Locking Slide Arm.

Installs easily with no drilling required In-console printer mount with push button lock, safely stores the Brother PocketJet printer while still maintaining easy accessibility for paper replacements and maintenance Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments Multiple armrest mounting locations (3 on the back of console, 1 on side) allow for flexibility to mount the armrest wherever needed for optimal comfort *No OEM relocation is required *Printer not included

Wide body design maximizes mounting space Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations *Fit may vary if OEM console option is present *OEM relocation is located on the passenger side of the console box

Low profile, no-drill vehicle specific console box Six fasteners for mounting right to transmission hump, does not require a leg kit or MCS top plate A removable top plate and center brace for easy radio installation and wire routing Four 12-Volt knockouts (located on passenger side) USB and MP3 knockouts for aftermarket module: (item no. 16648), relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance 3 faceplates and 3 filler panels are included Console box ships fully assembled (except for accessories). Must order as it. There are no substitutions for accessories included with the kit. Accessories may need to be assembled Horizontal, low profile section: Accommodates 6.5" (15.2 cm) of mounting space with a cup holder, and 11" (27.9 cm) of mounting space without a cup holder installed Designed to house radios, control heads and accessories Vertical, angled section : Accommodates 7.5" (19.1 cm) of mounting space to house 1 to 2 full-sized radios or devices

Low profile, no-drill vehicle specific console box Accommodates shifter A traction control/OEM plate (needed only if vehicle has a traction control module) Easily mounts right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable center brace for easy radio installation and wire routing Ships with dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Threaded PEM's provided for rear mounted armrest to the console 1, 12 Volt and 2 switch knock-outs (Located on shifter faceplate) Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Will ship fully assembled Includes 3 faceplates and 3 filler panels Horizontal section: Section accommodates 13" of mounting space without cup holder and is designed to house radio control heads and accessories With traction control faceplate = 7.5” of mounting internal height With traction control faceplate = 10” of mounting space With traction control faceplate and Internal cup holder = 5.5” of mounting space Designed to house full sized devices and accessories Vertical, angled sections: Angled section accommodates 5" of mounting space and is designed to house radio control heads and accessories

Installs easily with no drilling required In-console printer mount with push button lock, safely stores the Brother PocketJet printer while still maintaining easy accessibility for paper replacements and maintenance Rear armrest flips up when not in use to maximize workspace Low-profile design for ease of egress across front seats of vehicle Dual cup/pen holder is removable for easy cleaning Magnetic phone holder positions phone wherever needed for easy accessibility Vertical Mount provides flexibility to use the armrest of your preference for optimal comfort 3-hole pattern included on the removable top plate provides a secure mounting location for motion attachments *No OEM relocation is required *Printer not included

CNC Aluminum construction for rugged reliability Space saving and ergonomic design improves ergonomics and safety Captured key lock with auto-latching mechanism ensures user safety, protection and device security Universal mounting interface including VESA 75 for optimum compatibility with new and existing infrastructure Wedge Tilt 1.875" x 1.25" hole patern