Gamber-Johnson KIT- 2021+ Chevy Tahoe Wide Body Console Kit with Side Armrest and Cup Holder
Wide body design maximizes mounting space Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations *Fit may vary if OEM console option is present *OEM relocation is located on the passenger side of the console box
Gamber-Johnson Kit, 2011-2020 Dodge Charger Console Box, Cup Holder, Armrest, 7160-0500. Includes 3 faceplates and 3 filler panels. REPLACES PART # 7160-0137
Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top plate and center plate for easy radio installation and wire routing Ships with molded dash filler panels that gives the box a sleek appearance that blends in with the car’s aesthetics Five 12 Volt knock-outs (4 on the back and 1 on driver side) USB and MP3 knock-outs from stock console, relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powdercoat finish for maximum corrosion resistance Console box ships fully assembled (molded dash panels must be installed on-site) Includes 3 faceplates and 3 filler panels Must order as is. There are no substitutions for accessories. Accessories may need to be assembled.
Gamber-Johnson Kit, 2011-2020 Dodge Charger Console Box (Short), Cup Holder, Armrest, 7160-0500. Includes 3 faceplates and 3 filler panels.
Low profile vehicle-specific console box Console attaches to the transmission hump and does not require drilling Five (5) fasteners for mounting right to transmission hump, does not require a Leg Kit or MCS Top Plate A removable top and center plate for easy radio installation and wire routing Five (5), 12 Volt knock-outs located on passenger side USB and MP3 knock-outs from stock console relocated on passenger side Computer can be mounted on top of the console box and has the ability to be off-set towards the passenger on the “smiley face pattern” or mounted to the driver side with the 3-bolt hole pattern Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Ships fully assembled with molded dash filler panels to give the box a sleek look for blending in with the car’s aesthetics Includes 3 faceplates and 3 filler panels
Gamber-Johnson KIT: Panasonic Toughpad FZ-G1/G2 Docking Station, Dual RF, VESA Hole Pattern with LIND 11-16V Auto Power Adapter with Bare Wire Lead
Compatible with the Panasonic Toughpad FZ-G1 and G2 tablet computers with small or large bumper guards Panasonic certified electronics Docking station accommodates the tablet's extended battery, smart card reader, rear hand strap and large bumper guards. Access to all tablet control buttons and ports while tablet is docked Easy docking and release, Insert computer into the docking station, push top of dock down and engage lock to dock computer Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability
Gamber-Johnson KIT: Panasonic Toughpad FZ-G1 THIN Docking Station (Dual RF) with LIND 11-16V Auto Power Adapter with Bare Wire Lead
Compatible with the Panasonic Toughpad FZ-G1 tablet computer with small bumper guards Panasonic certified electronics Docking Station is designed to perfectly fit the G1 tablet without extra accessories, thus preserving the existing cabin space within the vehicle Access to all tablet control buttons and ports while tablet is docked Easy to use one-handed docking and release, Insert bottom of computer into the docking station, push top of computer against latch button to dock computer To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Upward-facing I/O ports; integrated cable strain relief and cable management system Keyed lock for theft deterrence VESA 75mm mounting pattern Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite design for reduced weight and durability
Gamber-Johnson KIT - F150 (2015-2020) F250-F550 (2017+) F-Series Console Box with Cup Holder
Works with the 2018 Pursuit Rated Police Responder Ford F-150 Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money No leg kit needed for installation Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded PEMS for various items for quickly mounting various accessories (mic clips, rear arm rest, side arm rest Verify if vehicle is equipped with floor shifter. If so, please see part 7160-1326 Does NOT work with factory center shifter console option.
Gamber-Johnson KIT - F150 (2015-2020) F250-F550 (2017+) F-Series 4X4 Shifter Console Box with Cup Holder
Works with Ford F-Series Trucks with the Floor 4X4 shifter Sloped front and horizontal section create a vehicle specific look and feel Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Cutouts on passenger, top, back side of console for 12V outlets and other accessories create freedom to locate those items effectively and better usability Push-button locking storage compartment with one (1) rectangular cutout and one (1) 12V outlet cutout Threaded pems and studs for various items for quickly mounting various accessories (mic clips and arm rests)
Gamber-Johnson KIT: Dell 12" DUAL RF Tablet Dock and LIND 190W Power Adapter (#7300-0469)
Comes with Lind automobile power supply (12-16 VDC input/20 VDC output). Cords connect on back of the dock and can be routed down the center or side. Complete access to ports and power supply input when the dock is mounted. Dual "Slam & Lock" technology for easy docking. Use the tablet stylus and card reader/scanner while the tablet is docked. The stylus cord, even when placed between the dock and tablet, won’t interfere with the tablet’s connectivity when docked. Guide walls on the bottom of the dock ensure proper connection when docking the tablet. VESA 75mm mounting pattern. Optional keyed lock for theft deterrence. Optional RF for WiFi and cellular. Additional USB 2.0 and mic/AUX ports on front of the dock. Steel and composite design for reduced weight. Rugged construction for long-term durability.
Gamber-Johnson KIT - 2020+ Ford Utility Deep Console Kit with PRNTR Mount & Cup Holder
Full depth accommodates one-piece radios and controls Flat design increases ease of egress in emergency situations Side mount configuration maximizes in-console mounting space Easy installation, no OEM parts to be removed Padded armrest flips up for convenience
Gamber-Johnson KIT - 2019-2020 New Body Style Chevy and GM Trucks (Leg Kit, Console, Cup Holder, Side Armrest, 6" LSA)
Leg kit mounts to existing center seat bolts located along transmission hump Console box filler wings going under dash are included with console Top plate on console allows for mounting a motion attachment or close-to-dash Top plate and spreader bar in middle are removable to easy installing of console and running wiring Two (2) mounting holes on console top plate made for motion attachments (driver side and passenger side) Console is low profile between the seats to create a comfortable work environment Ships fully assembled (except for console accessories i.e. faceplate, 12V outlets, etc.) Three (3) faceplate and three (3) fillers are included per console Threaded PEMS on side and rear accommodate various armrests
Gamber-Johnson Getac K120 NO RF Tablet vehicle docking station
Docking station design accommodates tablet’s rotating hand strap (sold separately) Easy to use one-handed operation: Insert bottom of computer into the docking station, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the docking station Access to all tablet control buttons and ports while tablet is docked Optional keyed lock for theft deterrance Upward-facing I/O ports; integrated cable strain relief and cable management system Vesa 75mm mounting pattern Rounded edges to enhance personal safety
Gamber-Johnson KIT: Getac A140 NO RF TABLET docking station(7160-1246-00) and Getac 120W power adapter w/ Cig lighter connector (#7300-0471)
Designed for the Getac A140 tablet computer Kit includes (item no. 7160-1246-00) NO RF docking station + (item no. 17057) Getac 120W auto power adapter Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability VESA 75mm mounting pattern
Gamber-Johnson KIT - 2020+ Ford Utility Short Console Box with Cup Holder, Pole Armrest, and 6" LSA
Horizontal mounting space is shortened to increase accessibility to gun mounts and equipment Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Easy installation with no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace and ease of egress Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included
Gamber-Johnson Panasonic Toughbook 33 Trimline™ Laptop Vehicle Cradle (No electronics) with LIND auto power adapter (7300-0197)
Aluminum construction for strength and durability Cradle can be docked in both laptop and tablet orientation Key lockable for added theft deterrence Optional tablet theft deterrence module for additional safety Ergonomic design for safety and single hand operation VESA 75 mounting pattern Minimal footprint for increased usable cabin space SKU's available with power supply units
Gamber-Johnson KIT - 2020+ Ford Utility Low Profile Console Box with Cup Holder, Rear Armrest, and Mongoose motion attachment
Lowered top plate maintains accessibility to optional rear HVAC controls (Ford 17A ordering option) Sloped front for ease of use and visibility of radio and siren controls Easy installation, no OEM parts to be removed Console sits low between the front seats to create a more comfortable workspace Mounting holes on top plate allow for easy installation of desired motion attachments Low profile creates ease of egress between seats Relocation faceplate for OEM 12V, USB, AUX 12V, and switch knockout included. Rear wire chase also included Cup holders are removable for easy cleaning Padded armrest flips up for convenience Locking slide arm can rotate 360° with locking points at every 15° for maximum positioning flexibility
Gamber-Johnson KIT- 2021+ Chevy Tahoe Wide Body Console Kit with Printer Mount, Side Armrest and Cup Holder
Wide body design maximizes mounting space Push-button locking storage compartment keeps valuables safe and includes one rectangular cutout and one 12V outlet cutout Simple and fast, no-drill install as the console is specific to vehicle using existing mounting points saving you time and money Computer and devices can be easily mounted to the 3-hole pattern on either driver or passenger side Includes three 12 volt plug knock-outs, three USB power ports, and two mic mount locations *Fit may vary if OEM console option is present *OEM relocation is located on the passenger side of the console box
Gamber-Johnson Getac A140 TRI RF TABLET vehicle docking station
Designed for the Getac A140 tablet computer Docking station design accommodates tablet's built-in rubber hand strap, stylus, and optional multi-function hard handle (sold separately) Access to all tablet control buttons, ports, smart card reader and front camera while tablet is docked Easy to use one-handed operation: Insert bottom of computer into the dock, push top of computer against latch button until latch engages To remove, push up on latch-button with thumb to disengage and pull computer out of the dock Upward-facing I/O ports; integrated cable strain relief and cable management system Floating docking connector for reliable connectivity in the most rugged environments Optional keyed lock for theft deterrence Rounded edges to enhance personal safety Gamber-Johnson rugged construction and reliability Composite/aluminum design for reduced weight and durability VESA 75mm mounting pattern
Gamber-Johnson Kit, 2015-2020 Tahoe Console Box (Silverado Truck) w/ Armrest, Cup Holder and 7160-0500. Includes 3 faceplates and 3 filler panels.
No-drill solution that attaches to the vehicle without the need to order a separate top plate. Leg kit is provided with the console box Two 12 volt plug inserts located on passenger side USB/MP3/SD card from factory console can be relocated on passenger side using knock-outs or USB/MP3/SD card/12 Volt from factory console can be relocated using faceplate, item no. 15250 Front plate of console (underneath the dash) allows a fuse block or Lind shut down timer using pre-configured mounted holes Computer can be center mounted in two locations: off-set towards the passenger on the “smiley face pattern" or on the 3-bolt pattern closer to the driver for easy articulation access Heavy gauge steel, fully welded construction for long-term durability Black powder coat finish for maximum corrosion resistance Box will ship fully assembled 3 faceplates and 3 filler panels are included Console box works with manual 4x4 shift lever Must order as is. There are no substitutions for accessories. Accessories may need to be assembled